Lever Lockset

Specifications:

• Door Range 1-3/8 in. to 1-3/4 in. thickness doors.
• Backset 2-3/4 in. Standard, 2-3/8 in., 3-3/4 in.
• Front 2-1/4 in. x 1-1/8 in., adjustable for flat or beveled doors 1/8 in. in 2 in.
• Strike ASA strike standard. “T” and full lip strike available on request.
• Latchbolt 1/2 in. Throw solid brass, reversible for RH or LH applications. UL listed.
• Latch and Stick Screws 8-32 X 1 in. FPH dual purpose.
• ANSI Standards Meets or exceeds of BHMA/ANSI A 156.2 Series 4000, grade 2(FF-H 106C), 400,000 cycles.
• Exposed Trim Wrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
• Keying 6-pin “C” keyway cylinder, 2 keys per lock.
• Cylinders & Keyways 6 pin solid brass “C” keyway standard
• SL00 US26D

Deadbolt

Bore diameter – 1 in. for latch, 1 1/2 in. or 2 1/8 in. for lock housing.

Specifications:

• Wrought Brass or Stainless Steel.
• Adjustable 1 3/8 in. (35mm) to 1 3/4 in. (45mm) door thickness.
• Backset adjustable 2 3/8 in. or 2 3/4 in..
• Deadbolt faceplate – standard 2 1/4 in. X 1 in. packed with 1/8 in. plastic filler to convert 1 in. face plate to 1 1/8 in. wide door preparations.
• Bore diameter – 1 in. for latch, 1 1/2 in. or 2 1/8 in. for lock housing.
• Strike – 1 1/8 in. X 2 3/4 in. square corner.
• Keyways – 6 pin solid brass “C” keyway standard.
• LSD01 US26D

Threshold

• Save on your electricity bills by preventing cold air draft from passing beneath the floor by adding thresholds.

  Specifications:

  • Height:1/ 2 in. (12.7mm)
  • Width: 6 in. (152.4mm)
  • CCR2726
• Gasket
  • Seals the gaps around the top & two sides of a door.  It contains (1) Jamb Header piece and (2) Hinge & Strike Jamb pieces of weatherstrip.

    Specifications:

    • Width: 1/4 in. (6.4mm)
    • Profile Height: 7/8 in.  (22.2mm)
    • Total Height: 1 1/8 in. (28.6mm)
    • PG-603
  • Door Shoe

  • Door Shoe is applied to the underside of the door creating a barrier against dust, drafts, light, smoke, and fire without compromising the aesthetics of the door.

    Specifications:

    • Width -1 1/4 in. (31.8mm)
    • Profile Height -1 5/16 in. (33.3mm)
    • Total Height with Insert – Approx. 1 7/8 in. (47.6mm)
    • DSR-408